Used 150T White Hydraulic Steel Cutting Machine For Plastic Sheet Film And Die Laser

The characteristics of the hydraulic cutting machine :
when the punching head acts on the workpiece through the die, the pressure in the acting cylinder does not reach the rated pressure, and the pressure will increase with the time of contact (cutting into the workpiece) until The electromagnetic reversing valve receives the signal, the reversing valve changes direction, and the punching head starts to reset; at this time, the pressure in the oil cylinder may not reach the set rated pressure value due to the time limit of the pressure oil entering the oil cylinder; that is, Said, the system pressure has not reached the design value, the punching has been completed.

Machine details

Computer control panel operation

Electrical components


Main motor 
 
Cutting machine die setting steps:
1.First confirm that the total thickness of the pulling board, glue board and knife die should be greater than the minimum stroke of the machine
2.Set the knife die cut avoid putting material
3.Set the cutting depth to 0 before setting
4.Turn the mechanical handle left to twist loose, so that its gravity smooth automatic sinking
5.At this time and then set the switch to the right, the pressure plate will automatically press down
6.After the platen is stationary, pull the setting handle up and down a few times to prevent the iron from being stuck to prevent the setting from being in place, and then turn right to lock
7.Set the switch back to the left, then the pressure plate will automatically rise
 
Features:
1.The automatic balance structure of double oil cylinders, four columns and balance connecting rods ensures that the cutting depth of each cutting position is exactly the same.
2.When the cutting plate is pressed down to contact the cutting knife, it will automatically cut slowly, so that there is no size error between the top and bottom layers.
3.The stroke has a unique setting structure, which is matched with the cutting knife and cutting height, so that the stroke adjustment is simple and correct.
4.The central automatic lubrication system ensures the precision of the machine and improves its durability.
5.It is applicable to multi-layer or single-layer coiled materials and sheets.
 

 
Knife Moulds (Wooden Knife Moulds)

Customised to customer products
The main consumables in the die material are the template and the positioning pins, the most used template is plywood and aluminium, mainly made of poplar, birch and linden. The quality requirements of the moulding board are small deformation, uniform thickness, dense internal non-gluing, and fast cutting speed for low power laser machines. The die is generally required to install movable positioning pins in order to align the upper and lower die concentrically, the die positioning pins are installed in the bottom die and the upper die opening with.
 
 
Our Team

 
Shenzhen Weixin Plastic Machinery Factory is a professional plastic complete set of equipmentintegrating R&D,production and sales: blister machine, positive and negative pressure integratedmachine, PET, PP, PS sheet extruder, cutting machine, cup making machine and other plasticequipment, has many years of history, the company has strong technical force, a group of skilled andexperienced professionals, machinery with excellent, stable performance and optimized operatingsystem, has won the trust of our customers. Customers all over China and many foreign countries, thecompany takes: quality first, service first, professional technology for the purpose, to provide ourcustomers with higher quality machinery, keep improving, keep pace with the times, and constantlyinnovate is our company's perseverance Pursue.
 
Office

Factory floor


International Rubber & Plastics Exhibition



 
Frequently Asked Questions
1. Who are we? We are based in Guangdong, China and have been selling to the Middle East (40.00%), North America (20.00%) South East Asia (20.00%) and East Asia (20.00%) in 2011. We have between 11 and 50 people in our office.
2. How do we ensure quality?
There is always a pre-production sample prior to mass production. There is always a final inspection before shipment.
3. What can you buy from us?
Vacuum thermoforming machines, vacuum forming machines for small plastic boxes, used sheet extruders, polyester/polypropylene/ polystyrene thermoforming machines Plastic folding and packaging machines for blister shells and other plastic equipment.
4. Why should you buy from us and not from other suppliers?
We are engaged in specialising in vacuum blister machines, small automatic vacuum blister machines, used sheet extruders
thick sheet machines, blister folding machines, plastic heat seal packaging machines and other plastic equipment.
What services can we offer?
Accepted delivery terms: FOB, CFR, CIF, EXW, FAS, FCA, DDP, DDU;. Accepted currencies of payment. US Dollar, Euro, Japanese Yen, Canadian Dollar, Australian Dollar, Hong Kong Dollar, British Pound, Chinese Yuan, Swiss Franc. Accepted payment methods: Wire Transfer, Letter of Credit, Credit Card, PayPal.
Languages: English, Chinese, Italian